3com S7906E Guide De Référence

 

1-11 

Table 1-9 display stp tc command output description 

MSTID 

MSTI ID in the MST region 

Port Port 

name 

Receive 

Number of TC BPDUs received on each port 

Send 

Number of TC BPDUs sent by each port  

 

instance instance-id vlan vlan-list 

undo instance instance-id [ vlan vlan-list ] 

MST region view 

2: System level 

instance-id: MSTI ID, ranging from 0 to 31. The minimum value is 0, representing the CIST.  

vlan vlan-list: Specifeis a VLAN list in the format of vlan-list = { vlan-id [ to vlan-id2 }&<1-10>, in which 

vlan-id represents the sub-VLAN ID and ranges from 1 to 4094. &<1-10> indicates you can specify up to 

10 sub-VLAN IDs or sub-VLAN ID ranges. 

Use the instance command to map the specified VLAN(s) to the specified MSTI.  

Use the undo instance command to remap the specified VLAN(s) or all VLANs to the CIST (MSTI 0).  

By default, all VLANs are mapped to the CIST.  

Notice that: 

z 

If you specify no VLAN in the undo instance command, all VLANs mapped to the specified MSTI 

will be remapped to the CIST. 

z 

You cannot map the same VLAN to different MSTIs. If you map a VLAN that has been mapped to 

an MSTI to a new MSTI, the old mapping will be automatically removed.  

Related commands: region-name,  revision-level,  check region-configuration,  vlan-mapping 

modulo, active region-configuration.  

# Map VLAN 2 to MSTI 1.  

<Sysname> system-view 

[Sysname] stp region-configuration 

[Sysname-mst-region] instance 1 vlan 2