3com S7906E Guide De Référence

 

1-17 

z 

RRPP configured with ring groups cannot interoperate with RRPP that does not support ring group 

configuration.  

Related commands: domain ring, display rrpp ring-group.  

# Create ring group 1 and enter its view.  

<Sysname> system-view 

[Sysname] rrpp ring-group 1 

[Sysname-rrpp-ring-group1] 

timer hello-timer hello-value fail-timer fail-value 

undo timer 

RRPP domain view 

2: System level 

hello-value: Hello timer value, in the range 1 to 10 seconds. 

fail-value: Fail timer value, in the range 3 to 30 seconds. 

Use the timer command to specify the value of the timers of the RRPP domain.  

Use the undo timer command to restore it to the default value. 

By default, the Hello timer value is 1 second and the Fail timer value is 3 seconds. 

Note that the Fail timer value must be greater than or equal to three times of the Hello timer value. 

# Set the Hello timer value to 2 seconds and the Fail timer value to 7 seconds. 

<Sysname> system-view 

[Sysname] rrpp domain 1 

[Sysname-rrpp-domain1] timer hello-timer 2 fail-timer 7