3com S7906E Guide De Référence
4-5
node-identifier argument is specified, the padding format will be restored to verbose with MAC
address as the node identifier.
Examples
# Specify the padding format as verbose for Option 82.
<Sysname> system-view
[Sysname] interface gigabitethernet2/0/1
[Sysname-GigabitEthernet2/0/1] dhcp-snooping information enable
[Sysname-GigabitEthernet2/0/1] dhcp-snooping information strategy replace
[Sysname-GigabitEthernet2/0/1] dhcp-snooping information format verbose
dhcp-snooping information remote-id format-type
Syntax
dhcp-snooping information remote-id format-type { ascii | hex }
undo dhcp-snooping information remote-id format-type
View
Ethernet port view
Default Level
2: System level
Parameters
ascii: Specifies the code type for the remote ID sub-option as ascii.
hex: Specifies the code type for the remote ID sub-option as hex.
Description
Use the dhcp-snooping information remote-id format-type command to configure the code type for
the non-user-defined remote ID sub-option.
Use the undo dhcp-snooping information remote-id format-type command to restore the default.
By default, the code type for the remote ID sub-option is HEX.
Note that:
This command applies to configuring a non-user-defined remote ID sub-option only. After you configure
the padding content for the remote ID sub-option using the dhcp-snooping information remote-id
string command, ASCII is adopted as the code type.
Examples
# Configure the code type for the non-user-defined remote ID sub-option as ascii.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] dhcp-snooping information remote-id format-type ascii