3com S7906E Guide De Référence

 

1-4 

ip-address: IP address of the destination server, in dotted decimal notation. 

Use the udp-helper server command to specify the destination server which UDP packets need to be 

forwarded to. 

Use the undo udp-helper server command to remove the destination server. 

No destination server is configured by default.  

Currently, you can configure up to 20 destination servers on an interface. 

Note that you will remove all the destination servers on an interface if you carry out the undo 

udp-helper server command without the ip-address argument. 

Related commands: display udp-helper server. 

# Specify the IP address of the destination server as 192.1.1.2 on the interface VLAN-interface 100. 

<Sysname> system-view 

[Sysname] interface vlan-interface 100 

[Sysname-Vlan-interface100] udp-helper server 192.1.1.2