3com S7906E Guide De Référence

 

1-22 

2: System level 

ipv6-address: IPv6 address. 

prefix-length: Prefix length of the IPv6 address, in the range 1 to 128. 

Use the ipv6 address command to configure an IPv6 site-local address or aggregatable global unicast 

address for an interface.  

Use the undo ipv6 address command to remove the IPv6 address from the interface. 

By default, no site-local address or global unicast address is configured for an interface. 

Note that except the link-local address automatically configured, all IPv6 addresses will be removed 

from the interface if you carry out the undo ipv6 address command without any parameter specified. 

# Set the aggregatable global IPv6 unicast address of VLAN-interface 100 to 2001::1/64. 

<Sysname> system-view 

[Sysname] interface vlan-interface 100 

[Sysname-Vlan-interface100] ipv6 address 2001::1/64 

Interface view 

2: System level 

None 

Use the ipv6 address auto link-local command to automatically generate a link-local address for an 

interface. 

Use the undo ipv6 address auto link-local command to remove the automatically generated link-local 

address for the interface. 

By default, a link-local address will automatically be generated after a site-local or global IPv6 unicast 

address is configured for an interface.