3com S7906E Guide De Référence

 

1-30 

ipv6 nd nud reachable-time value 

Interface view 

2: System level 

value: Neighbor reachable time in milliseconds, in the range of 1 to 3,600,000. 

Use the ipv6 nd nud reachable-time command to configure the neighbor reachable time on an 

interface. This time value serves as not only the neighbor reachable time on the local interface, but also 

the value of the Reachable Timer field in RA messages sent by the local interface. 

Use the undo ipv6 nd nud reachable-time command to restore the default neighbor reachable time 

and to specify the value of the Reachable Timer field in RA messages as 0, so that the number of hops 

is determined by the requesting device itself. 

By default, the neighbor reachable time on the local interface is 30,000 milliseconds and the Reachable 

Timer field in RA messages is 0. 

# Set the neighbor reachable time on VLAN-interface 100 to 10,000 milliseconds. 

<Sysname> system-view 

[Sysname] interface vlan-interface 100 

[Sysname-Vlan-interface100] ipv6 nd nud reachable-time 10000 

Interface view 

2: System level 

None