3com S7906E Guide De Référence

 

1-8 

[Sysname] interface tunnel 2/0/3 

[Sysname-Tunnel2/0/3] 

service-loopback-group number 

undo service-loopback-group 

Tunnel interface view 

2: System level 

number: Service loopback group ID, in the range of 1 to 1024.  

Use the service-loopback-group command to reference a service loopback group on the tunnel 

interface. 

Use the undo service-loopback-group command to remove the referenced service loopback group 

from the tunnel interface. 

By default, no service loopback group is referenced on a tunnel interface. 

The service loopback group to be referenced must have been configured and have the service type set 

to tunnel in system view. 

One tunnel interface can reference only one service loopback group. 

Related commands: service-loopback group in Service Loopback Group Commands in the Access 

Volume. 

# Create service loopback group 1 of tunnel type. 

<Sysname> system-view 

[Sysname] service-loopback group 1 type tunnel 

# Add a Layer 2 GigabitEthernet interface to service loopback group 1. 

[Sysname] interface gigabitethernet 1/0/1 

[Sysname-GigabitEthernet1/0/1] stp disable 

[Sysname-GigabitEthernet1/0/1] port service-loopback group 1 

[Sysname-GigabitEthernet1/0/1] quit 

# Reference service loopback group 1 on interface tunnel 2. 

[Sysname] interface tunnel 2/0/2 

[Sysname-Tunnel2/0/2] service-loopback-group 1