3com S7906E Guide De Référence
1-6
Table 1-2 display rip database command output description
Field
Description
X.X.X.X/X Destination
address and subnet mask
cost
Cost of the route
classful-summ
Indicates the route is a RIP summary route.
Nexthop
Address of the next hop
Rip-interface
Routes learnt from a RIP–enabled interface
imported Routes
redistributed
from other routing protocols
display rip interface
Syntax
display rip process-id interface [ interface-type interface-number ]
View
Any view
Default Level
1: Monitor level
Parameters
process-id: RIP process ID, in the range of 1 to 65535.
interface-type interface-number: Specifies an interface.
Description
Use the display rip interface command to display the RIP interface information of the RIP process.
If no interface is specified, information about all RIP interfaces of the RIP process is displayed.
Examples
# Display all the interface information of RIP process 1.
<Sysname> display rip 1 interface
Interface-name: Vlan-interface1
Address/Mask:1.1.1.1/24 Version:RIPv1
MetricIn:5 MetricIn route policy:123
MetricOut:5 MetricOut route policy:234
Split-horizon/Poison-reverse:on/off
Input/Output:on/on
Default route:off
Current packets number/Maximum packets number:234/2000
Table 1-3 display rip interface command output description
Field
Description
Interface-name
The name of an interface running RIP
Address/Mask
IP address and mask of the interface