Manualsbrain.com
  1. Manuels
  2. Marques
  3. 3com
  4. S7906E
  5. Guide De Référence

3com S7906E Guide De Référence

Télécharger
Page de 2327
 
1-22 
rip mib-binding 
Syntax 
rip mib-binding process-id 
undo rip mib-binding 
View 
System view 
Default Level 
2: System level 
Parameters 
process-id: RIP process ID, in the range of 1 to 65535.  
Description 
Use the rip mib-binding command to bind MIB operations with a specified RIP process, so that the RIP 
process can receive SNMP requests. 
Use the undo rip mib-binding command to restore the default. 
By default, MIB operations are bound to RIP process 1, that is, RIP process 1 is enabled to receive 
SNMP requests. 
Examples 
# Configure RIP 100 to accept SNMP requests. 
<Sysname> system-view 
[Sysname] rip mib-binding 100 
# Restore the default. 
[Sysname] undo rip mib-binding 
rip output 
Syntax 
rip output 
undo rip output 
View 
Interface view 
Default Level 
2: System level 
Parameters 
None 
Description 
Use the rip output command to enable the interface to send RIP messages.