3com S7906E Guide De Référence
1-12
Interface: 192.168.1.2 (Vlan-interface1)
Cost: 1 State: DR Type: Broadcast MTU: 1500
Priority: 1
Designated Router: 192.168.1.2
Backup Designated Router: 192.168.1.1
Timers: Hello 10 , Dead 40 , Poll 40 , Retransmit 5 , Transmit Delay 1
Table 1-3 display ospf brief command output description
Field
Description
OSPF Process 1 with Router ID
192.168.1.2
192.168.1.2
OSPF process ID and OSPF router ID
RouterID Router
ID
Border Router
Whether the router is a boarder router:
z
ABR
z
ASBR
z
NSSA ABR
Route Tag
The tag of redistributed routes
Multi-VPN-Instance is not enabled
The OSPF process does not support multi-VPN-instance.
Applications Supported
Applications supported.
MPLS Traffic-Engineering means MPLS TE is supported.
SPF-schedule-interval
Interval for SPF calculations
LSA generation interval
LSA generation interval
LSA arrival interval
Minimum LSA repeat arrival interval
Transmit pacing
LSU packet transmit rate of the interface:
z
Interval indicates the LSU transmit interval of the
interface.
interface.
z
Count indicates the maximum number of LSU packets
sent during each interval.
sent during each interval.
Default ASE Parameter
Default ASE Parameters: metric, tag, route type.
Route Preference
Internal route priority
ASE Route Preference
External route priority
SPF Computation count
SPF computation count of the OSPF process
RFC1583 Compatible
Compatible with routing rules defined in RFC1583
Area Count
Area number of the current process
Nssa Area Count
NSSA area number of the current process
ExChange/Loading Neighbors
Neighbors in ExChange/Loading state
Area
Area ID in the IP address format
Authtype
Authentication type of the area:
z
None: Non-authentication
z
Simple: simple authentication
z
MD5: MD5 authentication
Area flag
The type of the area
SPF scheduled Count
SPF calculation count in the OSPF area