3com S7906E Guide De Référence
1-20
Table 1-9 display isis peer command output description
Field
Description
System Id
System ID of the neighbor
Interface
Interface connecting to the neighbor
Circuit Id
Circuit ID
State Circuit
state
HoldTime
Holdtime
Within the holdtime if no hellos are received from the neighbor, the neighbor is
considered down. If a hello is received, the holdtime is reset to the initial value.
considered down. If a hello is received, the holdtime is reset to the initial value.
Type
Circuit type
L1 means the circuit type is Level-1 and the neighbor is a Level-1 router.
L2 means the circuit type is Level-2 and the neighbor is a Level-2 router.
L1(L1L2) means the circuit type is Level-1 and the neighbor is a Level-1-2 router.
L2(L1L2) means the circuit type is Level-2 and the neighbor is a Level-1-2 router.
PRI
DIS priority of the neighbor
Area
Address(es)
Address(es)
The neighbor’s area address
Peer IP
Address(es)
Address(es)
IP address of the neighbor
Uptime
Time that elapsed since the neighbor relationship was formed.
Adj Protocol
Adjacency protocol
# Display IS-IS neighbor statistics information.
<Sysname> display isis peer statistics
Peer Statistics information for ISIS(1)
---------------------------------------
Type IPv4 Up/Init IPv6 Up/Init
LAN Level-1 0/0 0/0
LAN Level-2 0/0 0/0
P2P 3/0 0/0
Table 1-10 display isis peer statistics command output description
Field
Description
Type
Neighbor type:
z
LAN Level-1: Number of Level-1 neighbors whose network type is broadcast.
z
LAN Level-2: Number of Level-2 neighbors whose network type is broadcast.
z
P2P: Number of neighbors whose network type is P2P.
IPv4 Up
Number of IPv4 neighbors in up state
IPv4 Init
Number of IPv4 neighbors in init state
IPv6 Up
Number of IPv6 neighbors in up state
IPv6 Init
Number of IPv6 neighbors in init state