3com S7906E Guide De Référence
1-61
Examples
# Set the maximum LSP age to 1500 seconds.
<Sysname> system-view
[Sysname] isis
[Sysname-isis-1] timer lsp-max-age 1500
timer lsp-refresh
Syntax
timer lsp-refresh seconds
undo timer lsp-refresh
View
IS-IS view
Default Level
2: System level
Parameters
seconds: LSP refresh interval in seconds, ranging from 1 to 65534.
Description
Use the timer lsp-refresh command to configure the LSP refresh interval.
Use the undo timer lsp-refresh to restore the default.
The default LSP refresh interval is 900 seconds.
Related commands: timer lsp-max-age.
To refresh LSPs before they are aged out, the interval configured by the timer lsp-refresh command
must be smaller than that configured by the timer lsp-max-age command.
Examples
# Configure the LSP refresh interval as 1500 seconds.
<Sysname> system-view
[Sysname] isis
[Sysname-isis-1] timer lsp-refresh 1500
timer spf
Syntax
timer spf maximum-interval [initial-interval [second-interval ] ]