3com S7906E Guide De Référence

 

1-14 

Any view 

1: Monitor level 

group-name: Peer group name, a string of 1 to 47 characters. 

Use the display bgp group command to display peer group information. 

# Display the information of the peer group aaa. 

<Sysname> display bgp group aaa 

 BGP peer-group is aaa 

 Remote AS 200 

 Type : external 

 Maximum allowed prefix number: 4294967295 

 Threshold: 75% 

 Configured hold timer value: 180 

 Keepalive timer value: 60 

 Minimum time between advertisement runs is 30 seconds 

 Peer Preferred Value: 0 

 No routing policy is configured 

  Members: 

  Peer            V    AS  MsgRcvd  MsgSent  OutQ PrefRcv Up/Down  State 

 

  2.2.2.1         4   200        0        0     0       0 00:00:35 Active 

Table 1-2 display bgp group command output description 

BGP peer-group 

Name of the BGP peer group  

Remote AS 

AS number of peer group 

type 

Type of the BGP peer group: IBGP or EBGP 

Maximum allowed prefix number 

Maximum prefixes allowed to receive from the peer 
group 

Threshold 

Percentage of received prefixes from the peer group 
to maximum prefixes allowed to receive from the peer 
group; If the percentage is reached, the system 
generates alarm messages. 

Configured hold timer value 

Holdtime interval 

Keepalive timer value 

Keepalive interval 

Minimum time between advertisement runs

Minimum interval for route advertisements 

Peer Preferred Value 

Preferred value specified for the routes from the peer