3com S7906E Guide De Référence

 

1-50 

[Sysname-bgp] ipv4-family vpn-instance vpn1 

[Sysname-bgp-vpn1] peer test fake-as 200 

peer { group-name | ip-address } filter-policy acl-number { export | import } 

undo peer { group-name | ip-address } filter-policy [ acl-number ] { export | import } 

BGP view/BGP-VPN instance view 

2: System level 

group-name: Name of a peer group, a string of 1 to 47 characters. 

ip-address: IP address of a peer. 

acl-number: ACL number, in the range 2000 to 3999. 

export: Applies the filter-policy to routes advertised to the peer/peer group. 

import: Applies the filter-policy to routes received from the peer/peer group. 

Use the peer filter-policy command to configure an ACL-based filter policy for a peer or peer group.  

Use the undo peer filter-policy command to remove the configuration.  

By default, no ACL-based filter policy is configured for a peer or peer group. 

Related commands: peer as-path-acl. 

# In BGP view, apply the ACL 2000 to filter routes advertised to the peer group test. 

<Sysname> system-view 

[Sysname] bgp 100 

[Sysname-bgp] peer test filter-policy 2000 export 

# In BGP-VPN instance view, apply the ACL 2000 to filter routes advertised to the peer group test (the 

VPN has been created). 

<Sysname> system-view 

[Sysname] bgp 100 

[Sysname-bgp] ipv4-family vpn-instance vpn1 

[Sysname-bgp-vpn1] peer test filter-policy 2000 export 

peer ip-address group group-name [ as-number as-number ] 

undo peer ip-address group group-name