3com S7906E Guide De Référence

 

1-59 

BGP view  

2: System level 

group-name: Name of a peer group, a string of 1 to 47 characters. 

ip-address: IP address of a peer.  

Use the peer reflect-client command to configure the router as a route reflector and specify a 

peer/peer group as a client. 

Use the undo peer reflect-client command to remove the configuration. 

By default, neither the route reflector nor the client is configured. 

Related commands: reflect between-clients and reflect cluster-id. 

# In BGP view, configure the local device as a route reflector and specify the IBGP peer group test as a 

client. 

<Sysname> system-view 

[Sysname] bgp 100 

[Sysname-bgp] peer test reflect-client 

peer { group-name | ip-address } route-limit prefix-number

[ {

 alert-only 

|

 reconnect-time } 

| percentage-value ] *

undo peer { group-name | ip-address } route-limit 

BGP view/BGP-VPN instance view 

2: System level 

group-name: Name of a peer group, a string of 1 to 47 characters.  

ip-address: IP address of a peer.  

prefix-number: Number of prefixes that can be received from the peer or peer group, in the range 1 to 

128000. If the number of prefixes received from the peer/peer group reaches the prefix-number, the 

router will tear down the connection to the peer/peer group. 

alert-only: If the number of prefixes received from the peer/peer group reaches the prefix-number, the 

router will not tear down the connection to the peer/peer group but display an alarm message.