3com S7906E Guide De Référence
1-6
display ripng route
Syntax
display ripng process-id route
View
Any view
Default Level
1: Monitor level
Parameters
process-id: RIPng process ID, in the range of 1 to 65535.
Description
Use the display ripng route command to display all RIPng routes and timers associated with each
route of a RIPng process.
Examples
# Display the routing information of RIPng process 100.
<Sysname> display ripng 100 route
Route Flags: A - Aging, S - Suppressed, G - Garbage-collect
----------------------------------------------------------------
Peer FE80::200:5EFF:FE04:B602 on Vlan-interface100
Dest 3FFE:C00:C18:1::/64,
via FE80::200:5EFF:FE04:B602, cost 2, tag 0, A, 34 Sec
Dest 3FFE:C00:C18:2::/64,
via FE80::200:5EFF:FE04:B602, cost 2, tag 0, A, 34 Sec
Table 1-4 display ripng route command output description
Field
Description
Peer
Neighbor connected to the interface
Dest
IPv6 destination address
via
Next hop IPv6 address
cost
Routing metric value
tag Route
tag
Sec
Time that a route entry stays in a particular state
“A”
The route is in the aging state.
“S”
The route is in the suppressed state.
“G”
The route is in the Garbage-collect state.