3com S7906E Guide D’Installation Rapide
1-8
Figure 1-8 Front panel of the S7906E-V
(1)
(4)
(2)
(6)
(3)
(4)
(5)
(1) Fan tray
(2) LPUs (in slot 2 to slot 7)
(3) Jack for ESD-preventive wrist strap
(4) Power module
(5) Air filter
(6) SRPUs (in slot 0 and slot 1)
All the modules of the switch are hot swappable.
z
The S7906E-V switch has eight vertical slots. SRPUs are inserted in the left two slots (see callout
(5) in
). SRPUs are required and support active-standby switchover. Different LPUs are
inserted in the other six slots (see callout (2) in
z
The fan tray is installed above the SRPUs and LPUs (see callout (1) in
) and the air flows
up from the bottom.
z
The two power modules, which sit in the lower part of the chassis (see callout (3) in
),
provide 1+1 redundancy backup. You can select either AC power supply or DC power supply.