Xanté aw 1200 Mode D'Emploi

You can print double-sided copy manually by feeding paper through the printer twice.

1.

Print the first side of the paper.

2.

Remove the paper from the output tray, straighten any curling edges, and allow
it to cool thoroughly.

3.

Load the paper using the following guidelines:

 

For best results when printing the second side, feed sheets individually or slip-feed
(feed a blank sheet between each printed sheet) to prevent toner from sticking to
adjacent pages.

a.

Determine whether to load media short or long edge first (see “Loading
Media” earlier in this chapter).

b.

Print a test page or check your software documentation to determine the
orientation of the media’s top edge.

c.

Load media into the multipurpose feeder print side up.

4.

Print the second side.

When printing envelopes, use the multipurpose cassette and follow the procedure in
chapter 1 for that cassette.

•

Use No. 4 envelopes and load them print side up in landscape orientation.

•

Do not use gummed envelopes or envelopes with adhesive tape.

•

Before loading, place each envelope on a flat surface and press it smooth to make
the corners and folds as flat as possible.

•

Load envelopes flap closed in the multipurpose cassette to provide the best print
quality in the address area.

•

Never print on the flap portion or back of the envelope. This can cause a jam.

•

Format envelopes in your application and run a plain paper test print to check
flap alignment before running on more expensive envelope stock.

•

Do not use foil-covered, embossed envelopes, or multi-color printed postcard
like Kamo-mail.