Xanté aw 1200 Mode D'Emploi

2.

Connect the female end of the power cord into the printer’s power cord
receptacle (fig. 1.39); then, plug the other end into a standard electrical outlet
(grounded AC outlet).

Printing a Startup Page

The first time you turn on the printer, it prints a start-up page in approximately 60
seconds. The printer does not have to be attached to the host to print this page.

The startup page contains configuration information concerning your printer. This
includes such things as the printer’s name and current firmware version.

This page prints each time you start the printer unless you disable it. How you disable
or enable this printing depends on your environment (Macintosh or PC). The PS Files
Folder (Macintosh) and PS_Files Folder (PC) on the XANTÉ CD-ROM contain
download PostScript files, (Startpg.on and Startpg.off) that enable or disable this
printing.

Macintosh:

Use Adobe Downloader to download the appropriate file to enable or
to disable startup page printing. See “Adobe Downloader” and “PS
Files Folder” in chapter 2 for details.

PC:

Use the following DOS command, substituting the appropriate file
name and a different port if necessary, to enable or to disable startup
page printing.

COPY FILENAME.PS LPT

 

↵

See “PS_Files Folder” in chapter 3 for details.

You also can use the Turn Startup Page On/Off option available through your browser
after you download the XANTÉ Utilities. See “Informational Pages (Start Page and
Low Toner Page)” in chapter 5 for details.