Xanté aw 1200 Mode D'Emploi
Troubleshooting – 8-15
2.
Hold the ends of the jammed media and slowly pull it straight out (fig. 8.4).
Then, slide the cassette back into the printer until it snaps into place (fig. 8.5).
Then, slide the cassette back into the printer until it snaps into place (fig. 8.5).
Fig. 8.5 Reinstall Cassette
Fig. 8.6 Remove Optional Cassette
3.
Remove the optional cassette if applicable by lifting it gently and pulling
straight out (fig. 8.6).
straight out (fig. 8.6).
4.
Hold the ends of the jammed media and slowly pull it straight out (fig. 8.7).
Then, slide the optional cassette back into the printer until it snaps in place (fig.
8.8).
Then, slide the optional cassette back into the printer until it snaps in place (fig.
8.8).
Fig. 8.7 Remove Jammed Media
Fig. 8.8 Reinstall Optional Cassette
Clearing a Fuser Area Jam
Remove media jams slowly and carefully to prevent tearing the paper. Media scraps in
the printer can become a fire hazard.
the printer can become a fire hazard.
1.
Make sure the printer is on and remove any media in the output tray.