Xantech 480-95 Manuel De Montage
08905099B
-
2
-
SPECIFICATIONS:
INSTALLATION
This unit is meant to be interfaced to Xantech Connecting Blocks, such as CB12, 789-44, 791-44, etc.
PLACEMENT
Placement of the IR Receiver does matter when used in the presence of a Plasma Display. Ideally it
should be placed somewhere around the Display with the front of the receiver flush with the front of
the Display. If the 480-95 needs to be placed in front of the display (such as on an adjacent side wall
perpendicular to the display), make sure it is placed at a location at least 45 degrees off axis from the
corners of the unit. The presence of Direct Sunlight and Fluorescent Lighting should not effect the
reception of this unit.
This unit is meant to be interfaced to Xantech Connecting Blocks, such as CB12, 789-44, 791-44, etc.
PLACEMENT
Placement of the IR Receiver does matter when used in the presence of a Plasma Display. Ideally it
should be placed somewhere around the Display with the front of the receiver flush with the front of
the Display. If the 480-95 needs to be placed in front of the display (such as on an adjacent side wall
perpendicular to the display), make sure it is placed at a location at least 45 degrees off axis from the
corners of the unit. The presence of Direct Sunlight and Fluorescent Lighting should not effect the
reception of this unit.