Xerox 340 Manuel D’Utilisation

Cleaning

No user action required.  The printer is running an 
automatic cleaning operation.

Waiting For Manual 
Feed

Insert paper or transparency in the manual feed slot.

Waiting For 
Transparency

The print job specifies transparency but the printer 
detects that the paper tray is installed.  Load 
transparency in the media tray and press 

.

Waiting For Paper

The print job specifies paper but the printer detects that 
the transparency tray is installed.  Load paper in the 
media tray and press 

.

Upper Media Tray 
Empty

Add paper or transparencies to the standard media 
tray.

Media Tray Empty

Add paper or transparencies to the media tray.

Lower Media Tray 
Empty

Add paper to the lower media tray.

Replace Upper 
Media Tray

Insert the standard media tray.

Replace Media Tray

Insert the standard media tray.

Replace Lower 
Media Tray

Insert the lower media tray.

Incorrect Media 
Size

An incorrect paper size is loaded in the tray or paper 
narrower than A4-size is in the manual feed slot.  Use 
Letter- or A4-size media.

Manual Feed Paper

The printer requires a sheet of paper for cleaning but 
the media tray contains transparency.  Feed a sheet of 
paper into the manual feed slot.

Fault.  Service 
Required

Turn the printer off, wait at least 15 seconds and turn 
the printer’s power on again.  If the failure persists, note 
the code number in the display.  In the U.S., call 
Tektronix service at 1-800-835-6100.  Outside the U.S., 
contact your local Tektronix office.