Xerox 300x Mode D'Emploi
Calibrating the Printer
3
User Manual
3-17
Curve selection display
Each Curve Selection designates a color on the installed transfer roll:
■
If you have a 4-Color Transfer Roll installed in the printer, all
Curve Selections are available: Cyan, Magenta, Yellow, Black,
CMY, and CMYK.
Curve Selections are available: Cyan, Magenta, Yellow, Black,
CMY, and CMYK.
■
If you have a 3-Color Transfer Roll installed, the Cyan, Magenta,
Yellow, and CMY Curve Selections are available; the others are
grayed out.
Yellow, and CMY Curve Selections are available; the others are
grayed out.
■
If you have a Black Transfer Roll installed, only the Black Curve
Selection is available; the others are grayed-out.
Selection is available; the others are grayed-out.
Entering percentages of CMYK colors
Only the active percentage boxes are available, the others are grayed-out. To
change the active percentage points (but not the appearance of the curves),
use the Calibration Preferences dialog box; see page 3-27 for instructions.
Modify the existing values by clicking the increase or decrease arrows on the
edit boxes.
change the active percentage points (but not the appearance of the curves),
use the Calibration Preferences dialog box; see page 3-27 for instructions.
Modify the existing values by clicking the increase or decrease arrows on the
edit boxes.
Controlling the points on the curves
You can also edit the curves by dragging the curves around in the display.
The percentage boxes below the curves automatically change to reflect the
curve settings. Use the following table to control the points on the color
curves.
The percentage boxes below the curves automatically change to reflect the
curve settings. Use the following table to control the points on the color
curves.
Task
Macintosh
Windows
Add a point to a curve for a
finer degree of control.
finer degree of control.
Click on a curve.
Click on a curve with the left
mouse button.
mouse button.
Move a point on a curve to
change the position of the
point relative to other points.
change the position of the
point relative to other points.
Click and drag a point on a curve.
Click and drag a point on a curve
with the left mouse button.
with the left mouse button.
Delete a point from a curve.
Click a point on a curve to select
it, then press the Delete key.
it, then press the Delete key.
Or,
Double-click a point on a curve.
Click a point on a curve with the
left mouse button to select it, then
press the Delete key.
left mouse button to select it, then
press the Delete key.
Or,
Click a point on a curve with the
right mouse button.
right mouse button.