Xerox 300x Guida Utente

Each Curve Selection designates a color on the installed transfer roll: 

■

If you have a 4-Color Transfer Roll installed in the printer, all 
Curve Selections are available: Cyan, Magenta, Yellow, Black, 
CMY, and CMYK.  

■

If you have a 3-Color Transfer Roll installed, the Cyan, Magenta, 
Yellow, and  CMY Curve Selections are available; the others are 
grayed out.

■

If you have a Black Transfer Roll installed, only the Black Curve 
Selection is available; the others are grayed-out.  

Only the active percentage boxes are available, the others are grayed-out.  To 
change the active percentage points (but not the appearance of the curves), 
use the Calibration Preferences dialog box; see page 3-27 for instructions.  
Modify the existing values by clicking the increase or decrease arrows on the 
edit boxes.  

You can also edit the curves by dragging the curves around in the display.  
The percentage boxes below the curves automatically change to reflect the 
curve settings.  Use the following table to control the points on the color 
curves.  

Add a point to a curve for a 
finer degree of control.

Click on a curve.

Click on a curve with the left 
mouse button.

Move a point on a curve to 
change the position of the 
point relative to other points.

Click and drag a point on a curve.

Click and drag a point on a curve 
with the left mouse button.

Delete a point from a curve.

Click a point on a curve to select 
it, then press the Delete key.

Or,

Double-click a point on a curve.

Click a point on a curve with the 
left mouse button to select it, then 
press the Delete key.

Or,

Click a point on a curve with the 
right mouse button.