Gestetner 1045 Mode D'Emploi
Using SmartNetMonitor for Client
19
2
Deleting the port
The following procedure allows you to delete the printer port. If you want to de-
lete the port which is currently used in Windows, switch the port to another such
as “FILE”, then delete it. For more information about SmartNetMonitor for Cli-
ent, see SmartNetMonitor for Client Help.
lete the port which is currently used in Windows, switch the port to another such
as “FILE”, then delete it. For more information about SmartNetMonitor for Cli-
ent, see SmartNetMonitor for Client Help.
A
From the [Printers] window, click the icon of the printer which uses Smart-
NetMonitor for Client to print. On the [File] menu, click [Properties].
NetMonitor for Client to print. On the [File] menu, click [Properties].
B
Click the [Ports] tab and make sure that the SmartNetMonitor for Client
port is shown in the [Print to the following port(s)] box.
Remember the port name because this port should be deleted later.
port is shown in the [Print to the following port(s)] box.
Remember the port name because this port should be deleted later.
C
Select the [FILE] check box in the [Port] column.
D
Click [OK] to close the Printer Properties.
The port which is currently in use is changed.
The port which is currently in use is changed.
E
Open the Printer Properties of the same printer.
F
Select the [Ports] tab.
G
At the [Port] column in the [Print to the following port(s)] dialog box, click to se-
lect the SmartNetMonitor for Client port name as in step
lect the SmartNetMonitor for Client port name as in step
.
H
Click [Delete Port].
I
When the confirmation message appears, click [Yes].
The port is deleted.
The port is deleted.
J
Click [Close] to close the Printer Properties.
Uninstalling SmartNetMonitor for Client
Preparation
Before uninstalling SmartNetMonitor for Client, make sure that:
• The port settings dialog box is closed.
• No printer is using the SmartNetMonitor for Client port as a printer port.
Before uninstalling SmartNetMonitor for Client, make sure that:
• The port settings dialog box is closed.
• No printer is using the SmartNetMonitor for Client port as a printer port.
A
Open [Control Panel], and double-click the [Add/Remove Programs] icon.
B
Click the [Change or Remove Programs] tab, click [SmartNetMonitor for Client],
and click [Change/Remove].
and click [Change/Remove].
C
After the confirmation message appears, click [Yes].
UninstallShield removes all of the components of SmartNetMonitor for Cli-
ent.
UninstallShield removes all of the components of SmartNetMonitor for Cli-
ent.