Gestetner 5450 Guide D’Exploitation
50
Removing currently installed SIMMs.
Note
Always begin SIMM removal with slot 1.
Refer to the SIMM-slot placement rules at the
beginning of this Appendix for information as to
which type of SIMM is installed into which slot.
beginning of this Appendix for information as to
which type of SIMM is installed into which slot.
1. Locate the metal locking tabs holding the SIMM
in place on either side of the board slot.
Figure B-1.6. Locate the SIMM locking tabs.
2. Gently push down on the metal locking tabs while
rotating the board toward the back of the slot -
shown as rotating down and to the left in Figure
B-1.7 - until it clears the metal tabs. As it may
take two hands to hold down the metal locking
tabs on both sides of the board simultaneously,
you may want to call for another person to assist
you in this process.
shown as rotating down and to the left in Figure
B-1.7 - until it clears the metal tabs. As it may
take two hands to hold down the metal locking
tabs on both sides of the board simultaneously,
you may want to call for another person to assist
you in this process.