Gestetner ao70 Mode D’Emploi
Copying
58
2
Partial Copy
Copies only a specified portion of the
original.
original.
Reference
You can specify the start position
(Y1) and the end position (Y2). See
p.130 “Partial Copy Priority”
(Y1) and the end position (Y2). See
p.130 “Partial Copy Priority”
A
Press the
{Sample Copy/Partial
Copy
} key.
B
Press the [Partial Copy] key.
C
Press the [Y2] key, and then enter
the scan end position with the
number keys.
the scan end position with the
number keys.
Note
❒ To change the value entered,
press the
{Clear/Stop} key and
enter the new value.
❒ The minimum length for Partial
Copy is 210mm (8.3") (250mm
(9.8") for paper roll 3). Enter a
value for Y2-Y1> that specifies a
length of at least 210mm (8.3")
(250mm (9.8") for paper roll 3).
(9.8") for paper roll 3). Enter a
value for Y2-Y1> that specifies a
length of at least 210mm (8.3")
(250mm (9.8") for paper roll 3).
❒ If the length specified by [Y2]
and [Y1] is less than 210mm, the
machine adjusts the start posi-
tion based on the last number
you entered.
machine adjusts the start posi-
tion based on the last number
you entered.
D
Press the [Y1] key, and then enter
the scan start position.
the scan start position.
E
Press the [OK] key.
F
Make your desired settings.
Reference
For details, see explanations of
each function.
each function.
G
Place your originals.
The machine makes a copy of the
specified area.
The machine makes a copy of the
specified area.
Exiting Partial Copy
A Press the {Clear Modes/Energy
Saver
} key.
ZEDS080E
DolphinGB-Copy-F_V4_FM.book Page 58 Monday, June 11, 2001 5:02 PM