Gestetner ao70 Mode D’Emploi
Copying
60
2
Zoom
You can change the magnification in
0.1% (or 1%) steps.
0.1% (or 1%) steps.
Preparation
You can set the ratio in the follow-
ing ways.
• Using the number keys
• Selecting a ratio close to the one
ing ways.
• Using the number keys
• Selecting a ratio close to the one
you want to set from Preset Re-
duce/Enlarge, and then press
the [-1%][+1%] or [-0.1][+0.1] keys
to adjust the ratio.
duce/Enlarge, and then press
the [-1%][+1%] or [-0.1][+0.1] keys
to adjust the ratio.
Limitation
❒ You cannot use Zoom if Auto Pa-
per Select or User Auto Reduce/
Enlarge are selected.
Enlarge are selected.
Note
❒ You can set the magnification ratio
from 25.0 to 400.0%.
❒ To set the magnification ratio on
screen, use the [-1%] or [+1%] key.
To specify a decimal value, use the
[-0.1]
To specify a decimal value, use the
[-0.1]
or [+0.1] key.
❒ For ratios 25.0 – 200.0% the steps
are 0.1%, for ratios 200.0 – 400.0%
the steps are 0.2%.
the steps are 0.2%.
❒ You can select a ratio regardless of
the size of an original, copy paper
or roll paper. With some ratios,
parts of the image might not be
copied or margins will appear on
copies.
or roll paper. With some ratios,
parts of the image might not be
copied or margins will appear on
copies.
A
Press the [Reduce/Enlarge] key.
When using the Number keys
A Press the [Input Ratio] key.
B Enter the desired ratio with the
number keys.
Note
❒ Use the {·} key to enter a dec-
imal point.
To change the value, press the
{Clear/Stop} key, and then enter
the new value.
the new value.
ZEDG060E
ZEDS090E
DolphinGB-Copy-F_V4_FM.book Page 60 Monday, June 11, 2001 5:02 PM