Gestetner dsc224 Mode D'Emploi
Appendix
94
7
EEEE
Select [Property Sheet], and then click [OK].
TCP/IP
A Click the [General] tab, and then type the device name into the [Device
Name]
box and comment into the [Comment] box.
• In the [Device Name] box, type the name of the printer in under 13 char-
acters. The factory default name consists of “RNP” and the last 3 bytes
of the MAC address on the Network Interface Board. For example,
when the MAC address is 00:00:74:62:7D:D5, the factory default name is
“RNP627DD5”. No name of 9 characters is permitted if the prefix is
“RNP”. Also, when DHCP is selected as an IP address setting, the
number of characters is limited to 13 characters.
of the MAC address on the Network Interface Board. For example,
when the MAC address is 00:00:74:62:7D:D5, the factory default name is
“RNP627DD5”. No name of 9 characters is permitted if the prefix is
“RNP”. Also, when DHCP is selected as an IP address setting, the
number of characters is limited to 13 characters.
• In the [Comment] box, type any comment on printers in under 31 charac-
ters.
NetBEUI
A Click the [General] tab, and then type the comment into the [Comment]
box.
In the [Comment] box, type any comment on printers in under 31 characters.
In the [Comment] box, type any comment on printers in under 31 characters.
B Click the [NetBEUI] tab.
C Type the computer name into the [Computer Name] box.
C Type the computer name into the [Computer Name] box.
• In the [Computer Name] box, type the name that helps you to identify
printers using the NetBEUI protocol. The factory default name consists
of “RNP” and the last 3 bytes of the MAC address on the Network In-
t e r f a c e B o a r d . F o r e x a m p l e , w h e n t h e M A C a d d r e s s i s
00:00:74:62:7D:D5, the factory default name is “RNP627DD5”. A maxi-
mum of 13 characters consisting of uppercase English letters, numeric,
or symbols (except "*+,/:;<=>?[\]|. and space) can be used. No name is
permitted if the prefix is “RNP”. You must avoid the duplication of the
same name on a network.
of “RNP” and the last 3 bytes of the MAC address on the Network In-
t e r f a c e B o a r d . F o r e x a m p l e , w h e n t h e M A C a d d r e s s i s
00:00:74:62:7D:D5, the factory default name is “RNP627DD5”. A maxi-
mum of 13 characters consisting of uppercase English letters, numeric,
or symbols (except "*+,/:;<=>?[\]|. and space) can be used. No name is
permitted if the prefix is “RNP”. You must avoid the duplication of the
same name on a network.
FFFF
When the configuration message appears, click [OK].
The NIB Setup Tool exits, and the setting is transmitted to the printer.
The NIB Setup Tool exits, and the setting is transmitted to the printer.
GGGG
Exit SmartNetMonitor for Admin.