Gestetner dsc224 Mode D'Emploi
Monitoring and Configuring the Printer
95
7
Web Browser
AAAA
Run the Web Browser.
BBBB
Type the address “http:// (IP address of the printer you want to change the
settings)”.
The status of the selected printer is displayed on the Web Browser.
settings)”.
The status of the selected printer is displayed on the Web Browser.
CCCC
Click [Configuration].
A dialog box that prompts you to type the user name and a password ap-
pears.
A dialog box that prompts you to type the user name and a password ap-
pears.
DDDD
Type the user name and the password, and then click [OK].
Type only the password in this dialog box. The factory default password is
“password”.
Type only the password in this dialog box. The factory default password is
“password”.
EEEE
Change names and comments.
TCP/IP
A Click [General], and then type the name into the [Device Name] box and
comment into the [Comment] box.
• In the [Device Name] box, enter the name of the printer in under 13 char-
• In the [Device Name] box, enter the name of the printer in under 13 char-
acters. The factory default name consists of “RNP” and the last 3 bytes
of the MAC address on the Network Interface Board. For example,
when the MAC address is 00:00:74:62:7D:D5, the factory default name is
“RNP627DD5”. No name of 9 characters is permitted if the prefix is
“RNP”. Also, when DHCP is selected as an IP address setting, the
number of characters is limited to in under 13 characters.
of the MAC address on the Network Interface Board. For example,
when the MAC address is 00:00:74:62:7D:D5, the factory default name is
“RNP627DD5”. No name of 9 characters is permitted if the prefix is
“RNP”. Also, when DHCP is selected as an IP address setting, the
number of characters is limited to in under 13 characters.
• In the [Comment] box, type any comment on printers in under 31 charac-
ters.
B Click the [IEEE 1394], and then type the name into the [Device Name] box
when you change the device name for IEEE 1394 (IP over 1394) interface.
• In the [Device Name] box, enter the name of the printer in under 13 char-
• In the [Device Name] box, enter the name of the printer in under 13 char-
acters. The factory default name consists of “RNP” and the last 5 bytes
of the EUI-64 on the IEEE 1394 (IP over 1394) Interface. For example,
when the EUI-64 is 00:00:74:00:02:01:0A:66, the factory default name is
“RNP0002010A66”. No name of 13 characters is permitted if the prefix
is “RNP”.
of the EUI-64 on the IEEE 1394 (IP over 1394) Interface. For example,
when the EUI-64 is 00:00:74:00:02:01:0A:66, the factory default name is
“RNP0002010A66”. No name of 13 characters is permitted if the prefix
is “RNP”.