Gestetner dsc224 Mode D'Emploi
Remote Maintenance by telnet
119
7
DNS
Use the dns command to configure or display the DNS (Domain Name System)
settings.
settings.
❖
❖
❖
❖ View setting
The following command displays the current DNS settings.
msh> dns
❖
❖
❖
❖ Using the DNS server obtained from the DHCP server
The following command sets the use of the DNS server obtained from the
DHCP server.
DHCP server.
msh> dns dhcp {valid | invalid}
• If you use the DNS server obtained from the DHCP server, designate “val-
id”. If not, designate “invalid”.
If you set “valid”, the DNS server from the DHCP server is prioritized.
If you set “valid”, the DNS server from the DHCP server is prioritized.
❖
❖
❖
❖ DNS server configuration
The following command sets the DNS server address.
msh> dns number server address
• You can register up to 3 DNS server numbers.
• You cannot use “255.255.255.255” as the DNS server address.
• You cannot use “255.255.255.255” as the DNS server address.
Domainname
Use the domainname command to display or configure the domain name set-
tings.
You can configure the Ethernet interface, the IEEE 1394 interface or the IEEE
802.11b interface.
tings.
You can configure the Ethernet interface, the IEEE 1394 interface or the IEEE
802.11b interface.
❖
❖
❖
❖ View setting
The following command displays the current domain name.
msh> domainname
❖
❖
❖
❖ Interface domain configuration
The following command displays or sets the Ethernet interface domain name,
the IEEE 1394 interface or the IEEE 802.11b interface.
the IEEE 1394 interface or the IEEE 802.11b interface.
msh> domainname interface name
*1
Available when the optional 1394 interface unit is installed.
*2
Available when the optional 802.11b interface kit is installed.
Interface
Interface that can be set
ether
Ethernet interface
IEEE 1394 interface
wlan
IEEE 802.11b interface