Gestetner dsc224 Mode D’Emploi
Troubleshooting
90
4
When Memory is Full
Note
❒ If you set "Memory Full Auto Scan Restart" of the User Tools ( ⇒ p.105 ) to
"Yes", the memory overflow message will not be displayed, but make Con-
nect Copy for the scanned originals automatically. Connect Copy continues
scanning and copying until finishing the job. Note that copy sets will be print-
ed out separately by scanning at this time.
nect Copy for the scanned originals automatically. Connect Copy continues
scanning and copying until finishing the job. Note that copy sets will be print-
ed out separately by scanning at this time.
Message
Cause
Solution & Reference
Memory is full. ## originals
have been scanned.
have been scanned.
Press [Print] to copy scanned
originals.
originals.
Do not remove remaining
originals.
originals.
Note
❒ Copying will stop and this
message will be displayed
when the memory is full.
when the memory is full.
The scanned original exceeds
the number of pages that can
be stored in memory.
the number of pages that can
be stored in memory.
Press [Print] to copy scanned
originals and clear the scan-
ning data. Press [Clear Memory]
to clear the scanning data and
not copy.
originals and clear the scan-
ning data. Press [Clear Memory]
to clear the scanning data and
not copy.
Press [Resume] to scan and
copy remaining originals.
copy remaining originals.
[Stop]
[Resume]
The machine checks if the re-
maining original should be
copied, after the scanned orig-
inal has been printed.
maining original should be
copied, after the scanned orig-
inal has been printed.
To continue copying, remove
all copies then press [Resume].
To stop copying, press [Stop].
all copies then press [Resume].
To stop copying, press [Stop].
UranosC1-ENcopyA_F1_FM.book Page 90 Friday, July 26, 2002 5:01 PM