Gestetner dsc332 Mode D’Emploi
Error & Status Messages on the Display Panel
29
4
Staple has been cancelled.
Staple printing has been can-
celed.
celed.
Check the paper feed direc-
tion, paper orientation and
stapling position.
tion, paper orientation and
stapling position.
Staple unit is in use for anoth-
er function. Please wait.
er function. Please wait.
The staple unit is in use by an-
other function, such as the
copier function.
other function, such as the
copier function.
Wait until the other function
has finished using the staple
unit.
has finished using the staple
unit.
DToner is almost empty.
The toner has almost run out.
Replace the toner cartridge
with a new one.
with a new one.
Turn the main power switch
off, then check the card.
off, then check the card.
The IEEE 802.11b interface
unit may have come off, or an
error may have occurred in the
IEEE 802.11b interface unit.
unit may have come off, or an
error may have occurred in the
IEEE 802.11b interface unit.
Turn off the main power
switch, and check the IEEE
802.11b interface unit is in-
stalled correctly. If the mes-
sage appears again, contact
your sales or service repre-
sentative.
switch, and check the IEEE
802.11b interface unit is in-
stalled correctly. If the mes-
sage appears again, contact
your sales or service repre-
sentative.
Unauthorized user access.
Print job has been cancelled.
Print job has been cancelled.
Print job canceled due to user
restrictions.
restrictions.
Check the User Code permis-
sion status.
sion status.
USB has a problem.
An error has occurred in the
USB interface.
USB interface.
Turn off the main power
switch, and back on again. If
the message appears again,
contact your sales or service
representative.
switch, and back on again. If
the message appears again,
contact your sales or service
representative.
Messages/Second messages
Causes
Solutions