Gestetner f540 Manuel Complémentaire

117

You can use NIC FAX as a network scanner.
The scanned data can be sent, or delivered to destinations registered to a Scan-
Router V2 Lite server or ScanRouter V2 Professional server on the network.

❒ To use ScanRouter V2 Lite, it is necessary to make settings with user param-

eters. See p.166 “User Parameters” (switch 16, bit 2).

❒ To use ScanRouter V2 Professional, settings must be made by a customer en-

gineer. Contact your nearest dealer.

Preparation
You need to make Network set-
tings beforehand. See p.28 “NIC
FAX Initial Settings”.
You need to register this machine
by I/O device settings for Scan-
Router V2 Lite/Professional.
It is recommended that you pro-
gram destinations in Quick Dial
keys or Speed Dials beforehand, so
that the operation will be easy and
trouble-free. It is assumed that des-
tinations are already programmed
into Quick Dial keys or Speed Di-
als in the following instructions.
See p.133 “Registering Addresses
for Scanner”.

❒ The scanned data is first transmit-

ted from NIC FAX to the server,
and then delivered to the specified
destinations. The delivery proce-
dure varies depending on the set-
tings made in each server.

❒ The following functions are not

available even if you specify them:
• Fax Header Print
• Label Insertion

AAAA

❒ If the Memory Trans. indicator

is lit, press the 

{{{{Memory Trans.}}}}

key.

ZHMS300E