Gestetner f540 Manuel Complémentaire
Using Network Delivery Scanner Functions
118
7
BBBB
Press the
{{{{Color Scan}}}} key.
Make sure the Color Scan indica-
tor is lit.
tor is lit.
CCCC
Press the
0
0
0
0 or 1
1
1
1 key to select the
original size, and then press the
{{{{OK}}}} key.
DDDD
Set the original, and then make
the scan settings as necessary.
the scan settings as necessary.
Note
❒ In order to set resolution to Ex-
tra Super Fine, you need to
make necessary settings with
user parameters. For informa-
tion about making this setting,
see p.166 “User Parameters”
(switch 20, bit 2).
make necessary settings with
user parameters. For informa-
tion about making this setting,
see p.166 “User Parameters”
(switch 20, bit 2).
EEEE
Enter the destination using a
Quick Dial key or Speed Dial.
Quick Dial key or Speed Dial.
Note
❒ You can specify the destination
using methods other than Quick
Dial or Speed Dial. See p.120
“Specifying Destinations With-
out Using Quick Dial Keys or
Speed Dials”.
Dial or Speed Dial. See p.120
“Specifying Destinations With-
out Using Quick Dial Keys or
Speed Dials”.
FFFF
To add one or more destinations,
press the
press the
{{{{OK}}}} key, and then re-
Note
❒ If you do not want to add any
other destinations, proceed to
.
GGGG
Press the
{{{{Start}}}} key.
Scanning begins.
When scanning is complete, the
standby display reappears, and the
scanned data is transmitted to the
server.
When scanning is complete, the
standby display reappears, and the
scanned data is transmitted to the
server.
Note
❒ Press the {{{{Clear/Stop}}}} key to
cancel scanning. If scanning is
canceled, the scanned data is
cleared and will not be trans-
mitted.
canceled, the scanned data is
cleared and will not be trans-
mitted.
❒ The Communication Failure Re-
port is printed if transmission
was not successful.
was not successful.
Monochrome Original
AAAA
Make sure the Memory Trans. in-
dicator is lit.
dicator is lit.
Note
❒ If the Memory Trans. indicator
is not lit, press the
{{{{Memory
Trans.
}}}} key.
ZHMS290E
ZHMS300E