ONKYO TX-8222 Manuel D’Utilisation
18
Connecting Your Components
—Continued
For the TX-8522, use an analog audio cable to connect
the TX-8522’s VIDEO IN L/R jacks to the analog audio
output jacks on the VCR, and use a video cable to
connect the TX-8522’s VIDEO IN V jack to the
composite video output jack on the VCR.
Then use an analog audio cable to connect the TX-
8522’s VIDEO OUT L/R jacks to the analog audio input
jacks on the VCR, and use a video cable to connect the
TX-8522’s VIDEO OUT V jack to the composite video
input jack on the VCR.
In addition, connect the TX-8522’s MONITOR OUT
jack to a composite video input jack on the TV.
You can select the video and sound from the VCR
simultaneously by pressing the VIDEO input selector
button.
the TX-8522’s VIDEO IN L/R jacks to the analog audio
output jacks on the VCR, and use a video cable to
connect the TX-8522’s VIDEO IN V jack to the
composite video output jack on the VCR.
Then use an analog audio cable to connect the TX-
8522’s VIDEO OUT L/R jacks to the analog audio input
jacks on the VCR, and use a video cable to connect the
TX-8522’s VIDEO OUT V jack to the composite video
input jack on the VCR.
In addition, connect the TX-8522’s MONITOR OUT
jack to a composite video input jack on the TV.
You can select the video and sound from the VCR
simultaneously by pressing the VIDEO input selector
button.
For the TX-8222, audio input from the VCR can be
connected. The video input from the VCR should be
connected to the TV directly.
Use an analog audio cable to connect the TX-8222’s
LINE 1/DVD IN L/R or LINE 2 IN L/R jacks to the
analog audio output jacks on the VCR.
connected. The video input from the VCR should be
connected to the TV directly.
Use an analog audio cable to connect the TX-8222’s
LINE 1/DVD IN L/R or LINE 2 IN L/R jacks to the
analog audio output jacks on the VCR.
For the TX-8522, use an analog audio cable to connect
the unused audio input L/R jacks on the TX-8522 to the
analog audio output jacks on the connected component.
the unused audio input L/R jacks on the TX-8522 to the
analog audio output jacks on the connected component.
For the TX-8222, use an analog audio cable to connect
the TX-8222’s LINE 1/DVD IN L/R or LINE 2 IN L/R
jacks to the analog audio output jacks on the connected
component.
the TX-8222’s LINE 1/DVD IN L/R or LINE 2 IN L/R
jacks to the analog audio output jacks on the connected
component.
If you connect other Onkyo components to the receiver
with the appropriate
with the appropriate
and audio cables, you can use
the following system functions.
cables are special
cables solely for use with Onkyo products (no
cables
are supplied with the receiver).
Auto Power On
When you turn on the power or start playback on a
component that’s connected to the receiver, the receiver
will turn on automatically. And when you set the receiver
to Standby, all connected components will go on
Standby as well (the receiver’s POWER switch must be
set to ON for this to work).
component that’s connected to the receiver, the receiver
will turn on automatically. And when you set the receiver
to Standby, all connected components will go on
Standby as well (the receiver’s POWER switch must be
set to ON for this to work).
Direct Change
When playback is started on an audio component
connected via
connected via
, the receiver will automatically select
that component as the input source.
Remote Control Operation
You can control all components in your system by using
the receiver’s remote controller. See page 10 for more
information.
the receiver’s remote controller. See page 10 for more
information.
Connecting a VCR
VIDEO
IN
MONITOR
OUT
AUDIO
OUT
VIDEO
OUT
L
R
VIDEO
IN
L
V
V
R
AUDIO
IN
VIDEO
IN
L
R
VIDEO
VIDEO
L
V
R
VIDEO
IN
Connecting a TV or Other Component
with an Audio Output
with an Audio Output
Connecting
Components
AUDIO
OUT
L
R
IN
L
R
TX-85228222_En.book 18 ページ ２００６年５月４日 木曜日 午前１１時５１分