TallyGenicom 3860 Guide D’Installation Rapide
GEK-01054
10
Installing the Front Tractor
The Front or Bottom tractor is shipped uninstalled. Dual path machines
have the rear tractor already installed.
have the rear tractor already installed.
At the front of the printer, pull the front
cover open and slide it into the storage
position.
cover open and slide it into the storage
position.
Hook the notch on each side of the
tractor set over the mounting rod in the
front of the printer.
tractor set over the mounting rod in the
front of the printer.
NOTE:
Install the paper motion detector wire into the connector on the right
side frame.
side frame.
MOUNTING
ROD
PAPER
MOTION
DETECTION
WIRE
CONNECTOR
GEAR COVER (ENGAGED WITH MOUNTING PIN)
MOUNTING PIN (BOTTOM FEED POSITION)
MOUNTING PIN (FRONT FEED POSITION)