Samsung CLP-650 Mode D'Emploi
Solving Problems
7.16
Press
Continue Button
Continue Button
The printer is waiting
for the user’s action
for the user’s action
before printing from
the Multi-purpose Tray
using the manual feed
the Multi-purpose Tray
using the manual feed
mode.
Load a sheet of print material
and press the On Line/
and press the On Line/
Continue button. You need to
press the button for each page.
press the button for each page.
Ready [Color]
Low Toner
Low Toner
The corresponding
toner cartridge in your
printer is low on toner.
toner cartridge in your
printer is low on toner.
Ready
IP Conflict
The IP address of the
printer conflicts with
other devices on the
network.
other devices on the
network.
Contact your network
administrator and choose an
address within your subnet
which will not conflict with any
address within your subnet
which will not conflict with any
other devices.
Rear Fan Error
A problem has
occurred in the Rear
Fan of the printer.
occurred in the Rear
Fan of the printer.
Unplug the power cord and
plug it in again. If the problem
persists, call for service.
plug it in again. If the problem
persists, call for service.
Replace [Color]
Toner
The corresponding
toner cartridge in your
printer is nearly
empty. However, the
printer is nearly
empty. However, the
printer continues
printing, even though
print quality is not
printing, even though
print quality is not
optimal. When the
‘[Color] Toner Empty’
message appears, the
‘[Color] Toner Empty’
message appears, the
printer will stop
printing.
printing.
If necessary, replace the
corresponding toner cartridge
with a new one. See page 6.4.
with a new one. See page 6.4.
Replace Fuser
The life span of the
fuser unit has expired.
fuser unit has expired.
Replace the fuser unit with a
new one. See page 6.7.
new one. See page 6.7.
Replace Fuser
Soon
The life span of the
fuser unit will expire
soon.
soon.
When “Replace Fuser” appears
on the display, replace the
fuser unit.
fuser unit.
Replace MP
Pick-roller
Pick-roller
The life span of the MP
pickup roller has
pickup roller has
expired.
Contact a service
representative.
representative.
Replace
Transfer Belt
Transfer Belt
The life span of the
paper transfer belt has
expired and the
paper transfer belt has
expired and the
printer will stop
printing until a new
paper transfer belt is
printing until a new
paper transfer belt is
placed into the printer.
Replace the paper transfer belt
with a new one. See page 6.5.
with a new one. See page 6.5.
Replace
Transfer
Belt Soon
Transfer
Belt Soon
The life span of the
paper transfer belt will
expire soon.
paper transfer belt will
expire soon.
When the “Replace Transfer
Belt” message appears, the
printer will stop printing.
Belt” message appears, the
printer will stop printing.
Replace the paper transfer belt.
Message
Status
Do this...
Common Windows Problems
N
OTE
: Refer to the Microsoft Windows 98SE/Me/NT 4.0/2000/
2003/XP User’s Guide that came with your PC for further
information on Windows error messages.
information on Windows error messages.
Replace Tray1
Pick-roller
Pick-roller
The life span of the
Tray1 pickup roller has
Tray1 pickup roller has
expired.
Contact a service
representative.
representative.
Replace Tray2
Pick-roller
Pick-roller
The life span of the
Tray2 pickup roller has
expired.
Tray2 pickup roller has
expired.
Contact a service
representative.
representative.
SMPS Fan Error
A problem has
occurred in the SMPS
Fan of the printer.
Fan of the printer.
Unplug the power cord and
plug it in again. If the problem
persists, call for service.
persists, call for service.
Tray2 Error
The optional Tray2 is
not properly installed
not properly installed
or connected to the
printer.
printer.
After turn the printer off and
then back on, reinstall the
then back on, reinstall the
optional Tray2. If the message
persists, contact a service
representative.
persists, contact a service
representative.
Tray2 Jam
Cover Open
The optional Tray2 jam
cover is open.
Close the Tray2 cover firmly.
Message
Status
Do this...
Problem
Possible Cause and Solution
“File in Use” message
appears during
installation.
appears during
installation.
Exit all software applications. Remove all software
from the StartUp Group, then restart Windows.
Reinstall the printer driver.
from the StartUp Group, then restart Windows.
Reinstall the printer driver.
“Error Writing to LPTx”
message appears.
• Ensure that all cables are connected correctly
and the printer is on.
• If bi-directional communication is not turned on
in the driver, it will also cause this message.
“General Protection
Fault”, “Exception OE”,
“Spool32”, or “Illegal
Operation” messages
“Spool32”, or “Illegal
Operation” messages
appear.
Close all other applications, reboot Windows and
try printing again.
“Fail To Print”, “A printer
timeout error occurred.”
messages appear.
timeout error occurred.”
messages appear.
These messages may appear during printing. Just
keep waiting until the printer finishes printing. If
the message appears in standby mode or after
keep waiting until the printer finishes printing. If
the message appears in standby mode or after
printing has been completed, check the
connection and/or whether an error has occurred.
connection and/or whether an error has occurred.