Samsung 94v Mode D'Emploi

Before calling for service, check the information in this section to see if you can remedy any 
problems yourself. If you do need assistance, please call, 

the phone number on the Information 

section or contact your dealer

.

Is the power cord connected properly?

Check the power cord connection and 
supply. 

Can you see "Check Signal Cable" on 

the screen? 

Check the signal cable connection.

If the power is on, reboot the computer 
to see the initial screen(the login 
screen), which can be seen. 

If the initial screen (the login screen) 
appears, boot the computer in the 
applicable mode (the safe mode for 
Windows ME/XP/2000) and then 
change the frequency of the video card.
(Refer to the 

Preset Display Modes

)

Note: If the initial screen (the login 
screen) does not appear, 

contact a 

service center or your dealer

.

Can you see "Not Optimum Mode" 
"Recommanded mode 1280 x 1024 
60Hz" on the screen? 

You can see this message when the 
signal from the video card exceeds the 
maximum resolution and frequency that 
the monitor can properly handle.  

Adjust the maximum resolution and 
frequency that the monitor can properly 
handle. 

If the display exceeds SXGA or 75Hz, a 
"Not Optimum Mode. Recommended 
mode 1280 x 1024 60Hz" message is 

displayed. If the display exceeds 85Hz, 
the display will work properly but the 
"Not Optimum Mode. Recommended 
mode 1280 x 1024 60Hz" message 

appears for one minute and then 
disappears.  
Please change to the recommended 
mode during this one-minute period.  
(The message is displayed again if the