Samsung 94v Mode D'Emploi

Question

Answer

How can I change the frequency?

Frequency can be changed by reconfiguring the video card.  

Note that video card support can vary, depending on the version of the 
driver used. (Refer to the computer or the video card manual for 
details.) 

How can I adjust the resolution?

Windows ME/XP/2000 : Set the resolution at the Control 
Panel˧Display˧Settings.  

* Contact the video card manufacturer for details.

How can I set the Power Saving 
function?

Windows ME/XP/2000 : Set the function at BIOS-SETUP of the 
computer or the screen saver. (Refer to Windows/Computer Manual).  

How can I clean the outer 
case/LCD Panel?

Disconnect the power cord and then clean the monitor with a soft cloth, 
using either a cleaning solution or plain water.  

Do not leave any remains of the detergent nor scratch the case. Do not 
allow any water to go inside the monitor. 

Self-Test Feature Check 

 |  

Warning Messages 

 |  

Environment

  |  

Useful Tips

1. Turn off both your computer and the monitor.  
2. Unplug the video cable from the back of the computer.  
3. Turn on the monitor.  

If the monitor is functioning properly, you will see a box with a border and text inside as shown in 
the following illustration: The three boxes inside the border are red, green and blue.  

Failure of any of the boxes to appear indicates a problem with your monitor. This box also appears 
during normal operation if the video cable becomes disconnected or damaged. 

4. Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor.  

If your monitor screen remains blank after using the previous procedure, check your video controller 
and computer system; your monitor is functioning properly.