Belkin F1DD102U Guide D’Installation Rapide
OmniView
™
KVM Switch with Audio
Quick Installation Guide
SOHO Series
F1DD102U
F1DD104U
F1DD104U
1. Connect the speakers and microphone to the CONSOLE section of your KVM
Switch. (Fig. 6)
2. Connect one audio cable from the computer’s audio-output port to the
audio port in the CONSOLE Section of the KVM Switch. Do the same for the
microphone connection. (Fig. 7)
microphone connection. (Fig. 7)
3. Power on your connected computers.
You are now ready to use your KVM Switch.
Please refer to your User Manual for additional information.
Control multiple DVI/USB computers with one
USB keyboard and mouse, and DVI monitor
USB keyboard and mouse, and DVI monitor
Belkin Corporation
501 West Walnut Street
Compton • CA • 90220 • USA
Tel: 310.898.1100
Fax: 310.898.1111
Belkin Components, Ltd.
Express Business Park
Shipton Way • Rushden • NN10 6GL
United Kingdom
Tel: +44 (0) 1933 35 2000
Fax: +44 (0) 1933 31 2000
Belkin Components B.V.
Starparc Building • Boeing Avenue 333
1119 PH Schiphol-Rijk • The Netherlands
Tel: +31 (0) 20 654 7300
Fax: +31 (0) 20 654 7349
Belkin Components, Ltd.
7 Bowen Crescent • West Gosford
NSW 2250 • Australia
Tel: +61 (0) 2 4372 8600
Fax: +61 (0) 2 4372 8603
Fax: +61 (0) 2 4372 8603
Belkin Tech Support
US: 310.898.1100 ext. 2263
800.223.5546 ext. 2263
Europe: 00 800 223 55 460
Australia: 1800 666 040
P74182
© 2002 Belkin Corporation. All rights reserved. All trade names are
registered trademarks of respective manufacturers listed.
Connecting the Computers to the KVM Switch
3
1. Power up the computers. Once the operating system has loaded, connect
the USB KVM cable from your computer’s USB port to the USB port on the
KVM Switch. The operating system will automatically install the KVM Switch.
Do this for all USB connections. (Fig. 5)
KVM Switch. The operating system will automatically install the KVM Switch.
Do this for all USB connections. (Fig. 5)
2. Shut down your computer. Take the DVI cable and connect the male end of
the cable to the DVI port on the back of the computer. Connect the male
end of the DVI cable to the back of the KVM Switch for CPU1. Do this for
all computers. (Fig. 5)
end of the DVI cable to the back of the KVM Switch for CPU1. Do this for
all computers. (Fig. 5)
Connecting Audio and Microphone—Optional
4
Fig. 6
Fig. 7
Fig. 5