ICOM ic-2720h Manuel D'Instructions

36

5

MEMORY OPERATION

New2001

■ Memory bank setting

q Push the desired band’s [M/CALL•MW] several times to

select memory mode, then select the desired memory
channel via the same band’s [DIAL].

w Push the same band’s [MAIN•BAND] for 1 sec. 

• “– –” indication blinks as follows.

e Push the [MAIN•BAND] again to set the channel to bank

setting stand-by condition.

• “– –” indication blinking stops.

r Push the [M/CALL•MW] for 1 sec. then rotate the [DIAL] to

select the desired bank to be set.

• Bank initial blinks as follows.

t Push the [M/CALL•MW] again to set the channel into the

bank.

• “!” and bank initial blinking stops.

y Push the [MAIN•BAND] for 1 sec. then push the

[MAIN•BAND] momentarily again to return to regular mem-
ory condition.

u Repeat steps q to y to set another memory channel into

the same or another bank.

z Push [MR/CALL] then select the desired mem-

ory channel via [Y]/[Z] or keypad.

• Push [BAND] to select the desired band (left or

right) as the main band, in advance.

x Push [FUNC] then [

MONI

1(BANK)].

• “– –” indication blinks.

c Push [

CLR

A(MW)] to set the channel to bank

setting stand-by condition.

• “– –” indication stops blinking.

v Push [FUNC] then [

CLR

A(MW)] then push

[Y]/[Z] to select the desired bank to be set.

• Bank initial blinks.

b Push [

CLR

A(MW)] to set the channel into the

bank.

• “!” and bank initial stops blinking.

n Push [FUNC], [

MONI

1(BANK)] then [

CLR

A(MW)]

to return to regular memory channel condition.

m Repeat steps z to n to set an another memory

channel into the same or another bank.

BANK

[Y]/[Z]

MW

IC-2720H_2.qxd  03.5.13 9:45  Page 36 (1,1)