ICOM ic-2720h Manuel D'Instructions

38

6

■ Call channel selection

Call channel is pre-programmed memory channel that can be
accessed by simply pushing call channel button.

➥ Push [M/CALL•MW] sev-

eral times to select the
call channel mode then
rotate the same band’s
[DIAL] to select the de-
sired call channel.

• “C1” or “C2” appears in-

stead of memory channel
number indication.

• Push the [M/CALL•MW] sev-

eral times to select memory
mode, or push the same
band’s [V/MHz•SCAN] to se-
lect VFO mode.

➥ Push [MR/CALL] for 1 sec. to select the call

channel mode then push [Y]/[Z] to select the
desired call channel in the main band.

• Push [

MR/CALL

] to select memory mode, or push

[VFO/LOCK] to select VFO mode.

■ Call channel transferring

q Push the desired band’s [M/CALL•MW] several times then

rotate the same band’s [DIAL] to select the desired call
channel.

• “C1” or “C2” appears.

w Push the [M/CALL•MW] for 1 sec., then rotate the [DIAL] to

select the memory channel to transfer the contents to.

• “!” indicator and memory channel number blink.
• To transfer to the VFO, select “– –” with the [DIAL] then push the

[M/CALL•MW] for 1 sec. 

e Push the [M/CALL•MW] for 1 sec. to transfer the contents.

z Push [MR/CALL] for 1 sec. then push [Y]/[Z]

to select the desired call channel in the main
band.

x Push [FUNC], [

CLR

A(MW)] momentarily, then

push [Y]/[Z] to select the memory channel to
transfer the contents to.

• To transfer to the VFO, push [Y]/[Z] to select

“– –” then push [FUNC], [

CLR

A(MW)] for 1 sec. 

c Push [FUNC], then [

CLR

A(MW)] for 1 sec. to

transfer the contents.

MR/CALL

MW

[Y]/[Z]

MR/CALL

Push [M/CALL•MW] several times
to select call channel.

“C1” or “C2” appears

✔INFORMATION

When the VFO mode is 
selected from the call channel, 
a small “c” appears instead of 
memory channel number. 

IC-2720H_2.qxd  03.5.13 9:45  Page 38 (1,1)