Avaya P550 Guide De Référence
===NJPO
`Ü~éíÉê=N
`~àìå=mRRMLmUUM=pïáíÅÜ=^qj=`if=réäáåâ=oÉÑÉêÉåÅÉ=dìáÇÉI=sÉêëáçå=NKN
ëÉí=äÉÅ=EàçáåJãÉíÜçÇF
`çãã~åÇ=jçÇÉ
Configuration
aÉëÅêáéíáçå
Set the method by which the LEC joins an ELAN.
* Note: You must disable a LEC each time you make a change to
the configuration. After you make configuration
changes, you must enable the LEC in order for the
changes to take effect.
changes, you must enable the LEC in order for the
changes to take effect.
póåí~ñ
set lec <lecID> join-method {LES | LECS}
q~ÄäÉ=NJOQK==m~ê~ãÉíÉêëI=hÉóïçêÇëI=^êÖìãÉåíë
p~ãéäÉ=lìíéìí
This example sets LEC 2 to join method LECS.
ATM(configure)# set lec 2 disable
LEC 2 has been disabled
ATM(configure)# set lec 2 join-method lecs
Join Method LECS has been set for LEC 2
ATM(configure)# set lec 2 enable
LEC 2 has been enabled
Name
Definition
lecID
The LEC identifier. The range of values is:
Minimum = 1, Maximum = 128.
Minimum = 1, Maximum = 128.
LES | LECS
Determines whether the LEC connects
through the LECS, or bypasses the
configuration phase and goes directly to a
configured LES.
through the LECS, or bypasses the
configuration phase and goes directly to a
configured LES.