Avaya 2410 Notice D’Utilisation Abrégée

Conference

The Conference feature allows you to conference up to six
parties (including yourself) on a call.

To add another party to a call

1. Press

2. When you hear dial tone, dial the number of the

person you want to add to the call.

3. Wait for an answer.

4. To add the person to the call, press

again.

(If the called party does not answer or does not want

to join the conference, press

.) Then, you can

return to the held call by pressing its call appearance
button.

5. Repeat Steps 1 through 4 for additional conference

connections.

To add a held call to an active call

1. Press

2. When you hear dial tone, press the call appearance

button corresponding to the held call.

3. Press

again.

To remove the last person added to the conference call

1. Make sure that the conferenced call appearance is

selected.

2. Press

Getting Messages

Message

Your Message lamp turns on when a caller has left a

message for you. Press

to retrieve your messages,

and follow the prompts.

Note: Certain features must be programmed by your

system manager to activate the

button.

Please see your system manager if the message
button is not working properly.

Personalized Settings

Visual Ring

The Visual Ring option on the Options screen
allows you to choose a visual alert for
incoming calls. When you enable this option,
the telephone rings and the lamp above the
2410 display area flashes when an incoming
call arrives. By default, the Visual Ring option
is disabled.

To set the Visual Ring option

1. From the Home screen, press the

Option softkey.

The Options screen is displayed.

2. Press

the

Visual Ring feature button.

The Visual Ringing Alert screen is
displayed.

3. Press

the

Yes/No softkey (or press the

button to the right of the setting) to
indicate whether you want Visual Ring
enabled.

4. Press

the

Save softkey.

You will hear a confirmation tone.

Ring Pattern

The Ring Pattern option on the Options screen
allows you to choose a personalized ringing
pattern for your telephone. You can choose
from among eight different patterns.

To select a personalized ringing pattern

1. From the Home screen, press the

Option softkey.

The Options screen is displayed.

2. Press

the

Ring Pattern feature button.

The Select Ring screen with the current
ring pattern is displayed.

3. Use

and

or the dialpad to cycle

through the ringing patterns.

4. To save the selected ringing pattern,

press the Save softkey.

You will hear a confirmation tone.

Note: If you go off-hook or receive a call

during selection, the process is
canceled and you must start again.

Call Appearance/Button Labels

Edit Labels

You can change the labels of the call appearance/feature
buttons on your telephone. These new labels are stored in
your 2410 telephone.

To edit call appearance/feature button labels

1. From the Home screen, press the Label softkey.

The Label Action screen is displayed.

2. Press

the

Edit softkey.

The Label Select screen is displayed. You can use

and

to locate the label you want to edit.

3. Press the feature button on the 2410 telephone

corresponding to the label you want to edit.

The Label Edit screen is displayed. The New Label
field displays the current customized label (if any),
and the System Label field displays the system label.

4. Using the dialpad, edit the label. You can enter up to

13 characters. By default the first letter appears in
uppercase, and the following characters appear in
lowercase.

5. When finished, press the Save softkey.

View the System Labels

To view the call appearance/feature button labels on the
call processing system

1. From the Home screen, press the Label softkey.

The Label Action screen is displayed.

2. Press

the

Inspect softkey.

The Label Select screen is displayed showing the
system labels for the 2410 telephone.

3. Use

and

to scroll through the pages.

4. When you finished, press the Done softkey.

Restore the System Labels

To restore the system labels for all buttons

1. From the Home screen, press the Label softkey.

The Label Action screen is displayed.

2. Press

the

Restore softkey.

The Label Restore screen is displayed.

3. Press

the

Erase softkey.

The Confirm Erase prompt is displayed.

4. Press

the

Erase softkey.