Avaya 9630 Mode D'Emploi

Operating the 9630 Series WT

Issue 1 May 1999

3-9

5. Press either

or the Exit soft key to return to the calling screen.

To deactivate the backlight, do the following:

1. From the calling screen, press

2. Press .

3. Press

again. The display should indicate that the backlight is on.

4. Press the Off soft key.

5. Press either

or the Exit soft key to return to the calling screen.

Making Calls

You can make calls with the WT whenever the terminal is not off-hook active on a
call and has an idle call appearance. You can use post-origination dialing or
pre-origination dialing to make calls. Post-origination dialing requires that you get
dial tone before you dial a call, similar to a wired phone; pre-origination dialing
allows you to dial digits before you receive dial tone, similar to a cellular phone.

Using Post-Origination Dialing

To make a call using post-origination dialing, do the following:

1. Press a call appearance soft key or

2. Wait for the dial tone.

3. Once you receive dial tone, enter the telephone number of the party you

are calling.

Using Pre-Origination Dialing

To make a call using pre-origination dialing, do the following:

1. Enter the telephone number of the party you are calling on the key pad.

2. Press a call appearance soft key or

The digits you dial for pre-origination dialing are displayed.

NOTE:

If a call is active on a WT, you cannot use pre-origination dialing to dial a
new number from that terminal. This is true because dial pad key presses
are sent as tones in such a case.

Also, whenever a WT has an alerting call or no idle call appearances, you
cannot use pre-origination dialing to dial a new number from that terminal.

On/Off