Avaya 9630 Mode D'Emploi

Operating the 9630 Series WT

Issue 1 May 1999

3-11

1. From the calling screen, press

. The display should indicate that the

vibrator is turned on.

2. Press the Off soft key. The vibrator is now turned off, and the vibrator icon

disappears from the display.

3. Press either

or the Exit soft key to return to the calling screen.

Activating and Deactivating Silent Mode

You can turn on or off most audible ringing signals, error beeps, and warning
tones by pressing

for one second. Whenever you turn off audible

signals, the slashed bell icon appears in the display.

Whenever you enable Silent Mode, only priority ringing, intercom ringing, or
manual signaling is sounded at the WT. A low battery tone is generated in Silent
Mode whenever the user goes off hook and a low battery condition exists. All
other tones, including key clicks, are disabled whenever Silent Mode is activated.

Although there is not audible ringing when Silent Mode is activated, the WT
displays a message indicating that it is being rung, and it also displays the
appropriate flashing icon-like character indicating the call appearance status.

NOTE:

Silent Mode is independent of the vibrator setting.

Transferring Calls

To transfer a call from one extension to another, do the following:

1. Inform the active party that you are transferring the call and to hold on.

2. Press .

NOTE:

The active call is automatically placed on hold, and the idle call
appearance is activated.

3. Dial the telephone number of the next party.

4. Press

again to transfer the call.

NOTE:

Whenever all call appearances are in use, you cannot transfer a call or
receive and make other calls.

Silent

Trans