Avaya 3910 Notice D’Utilisation Abrégée

5

Use programming to store dialing sequences on programmable buttons (see
diagram, pages 2–3). Then simply touch the button to dial automatically.
1. Press

  

f 

0 0

 

 to enter programming mode.

2. Press a programmable button.
3. Press the buttons you normally press to dial another extension, to dial an

outside telephone number, or to use a system feature (see examples below).
NOTE:  To store 

i

 on a button, press the left 

i

 

button.

To program more buttons,or to change the programming, repeat Steps 2 and 3.

4. Press

 

f 

0 0

  

to exit programming mode.

To ring extension 11 with one touch, program

 

i 1 1

; to voice signal

extension 11, program 

i 

* 1 1

.

You can also use this button to:

■

Transfer calls with one touch.

■

See when the extension is busy 

(red steady light) or calling you (green flashing

light), or when a transferred call is returning to you or (on PARTNER II systems
only) when you are being manually signaled by the extension 

(green fluttering light).

To dial 555-5678 with one touch, program

 

5 5 5 5 6 7 8

.

Program the dial code on a button. For example, to use Do Not Disturb with one
touch, program

 

f 

0 1

 

on a button with lights. For some features, you can

also program an extension number or group number on the button, as indicated in
the descriptions on pages 6 and 7. For example, to use Call Pickup for calls ringing
at extension 12, program

 

i 6 1 2

   

on a button.

1. Press

 

f 

0 0

 

to enter programming mode.

2. Press

 

f

, 

then the two-digit Dial Code (80–99) for the phone number.

3. Enter the outside phone number (up to 20 digits).

To add more Speed Dial numbers, repeat Steps 2 and 3.

4. Press

 

f 

0 0

 

 

to exit programming mode.

To change a number, follow Steps 1–4 but enter the new number in Step 3.

You can enter the following special functions in Speed Dial or Auto Dial

numbers:

Pause

h

P

1.5-second pause

Recall

S

R

Timed switchhook flash

Stop

m

S

Stops dialing sequence until button is
pressed or code is dialed again

Touch-Tone Enable

t

T

Sends touch tones over a rotary line

PARTNER MAIL VS QR GUIDE

4/1/96, 2:22 PM

7