Avaya 1603 Mode D'Emploi

Perform a network assessment to ensure that the network will have the capacity for the 
expected data and voice traffic, and that it can support for all applications:

●

H.323,

●

DHCP,

●

HTTP/HTTPS, and

●

Jitter buffers

Also, QoS support is required to run VoIP on your configuration. For more information, see 

 and 

To operate properly, you need:

●

Category 5e cables designed to the IEEE 802.3af-2003 standard, for LAN powering,

●

For Avaya Communication Manager: TN2602 IP Media Processor circuit pack. Sites with a 
TN2302 IP Media Processor circuit pack are strongly encouraged to install a TN2602 
circuit pack.

●

For Avaya Communication Manager: TN799C or D Control-LAN (CLAN) circuit pack.

!

Important:

IP telephone firmware Release 1.0 or greater requires TN799C V3 or greater 
CLAN circuit pack(s). For more information, see the Communication Manager 
Software and Firmware Compatibility Matrix on the Avaya support Web site 

To ensure that the appropriate circuit pack(s) are administered on your media server, see 

. For more information about hardware requirements in 

general, see the Avaya one-X™ Deskphone Value Edition 1600 IP Telephone Installation and 
Maintenance Guide.