Epson 1000 ICS Mode D'Emploi

Problems and Solutions

Make sure your EPSON 1000 ICS is connected to your 
computer and plugged into a power source. 

■

The EPSON 1000 ICS has a power saving function 
(sleep mode); it comes on when you start scanning.

■

Make sure the EPSON 1000 ICS is plugged into a 
power outlet. 

■

Wait until the fluorescent lamp stays on (ready for 
scanning). You may need to preview your scan to 
make the lamp come on.

■

If you are using a USB hub, try connecting the 
EPSON 1000 ICS directly to the computer’s USB 
port. Use only the USB cable that came with your 
EPSON 1000 ICS.

■

If you see your EPSON 1000 ICS in the Windows 
Control Panel, but you can’t scan, uninstall and 
reinstall its software; see page 48.

■

Make sure your computer meets the system 
requirements listed on page 51 and supports the 
software applications you’re using.

■

Check if your computer has enough memory for your 
software. If you’re running other software at the same 
time, the computer may not have enough memory. 
(See your software and computer manuals.) Try 
closing any open applications, including screen savers 
and virus protection programs. 

■

If you are scanning a large image or scanning at a high 
resolution, your computer may not have enough 
memory to process the image.

■

Check your software installation. If all else fails, 
uninstall your software, then reinstall it; see page 48.